ROSS

How to install

1. Click the link on the right to download the file to your PC.
2. Copy the file "miscBls.img" to an EMPTY USB stick. (Other USB devices such as hard drives will not work)
3. Make sure the power is off on your HD Satellite receiver and insert the USB stick into the socket at the rear of the unit. Then switch the receiver on.
4. When the update is running, the LED display on the front of the receiver will display "UPd". If an error has occurrred "E88" will be displayed.
5. When the software has successfully been updated, the LED will display "ENd". Installation is now complete.

Warning: do not switch off the power whilst the update is in progress. This may result in damage to the flash memory inside.

System setup

If you experience problems installing the channel selection software upgrade please contact us.

Other information on installation and setting up your HD Satellite Kit can be found on the 22300HD-R information page.